HYT ASTM A513 1020 1026 ERW Mechanical Carbon Steel Welded Round Pipe

Description
Pipe Customization
About HYT

ASTM A513 Specification Scope

This specification covers round, square, rectangular, and special shape electric-resistance-welded carbon and alloy steel mechanical tubing produced by hot- or cold-rolling. The types of tubing covered here are: Type 1a, as-welded from hot-rolled steel (with mill scale); Type 1b, as-welded from hot-rolled pickled and oiled steel (mill scale removed); Type 2, as-welded from cold-rolled steel; Type 3, sink-drawn hot-rolled steel; Type 4, sink-drawn cold-rolled steel; Type 5, drawn over a mandrel; and Type 6, special smooth inside diameter. Heat and product analyses shall be made to determine the percentages of chemical elements, to which the steel specimens shall conform to. Tubing shall be free of injurious defects and shall have a workmanlike finish. When specified, tubing shall be coated with a film of rust retarding oil before shipping.

A513 Carbon Steel Mechanical Tubing Specifications & Requirements

ASTM A513 specifications state that manufactured carbon steel tubing must meet certain specifications before being sold for any type of project. The A 513 carbon steel spec sheet provides an accessible and straightforward way to check material standards before beginning your next project.

ASTM A513 Chemical Requirements

Grade Designation	Chemical Composition Limits, %
Grade Designation	Carbon	Manganese	Phosphorus, max	Sulfur, max
1010	0.05-0.15	0.30-0.60	0.035	0.035
1015	0.10-0.20	0.30-0.60	0.035	0.035
1020	0.15-0.25	0.30-0.60	0.035	0.035
1026	0.22-0.28	0.60-0.90	0.035	0.035

For pipe sizes and grades not found in the section above, please contact HYT at mail: [email protected] with your inquiry.

ASTM A513 Hardness Limits and Tensile Properties for Round Tubing

	Yield Strength, Ksi (MPa), min	Ultimate Strength, ksi (MPa), min	Elongation in 2 in. or 50 mm. % min	RB min	RB max
As-Welded Tubing
1008	30 (207)	42 (290)	15	50
1010	32 (221)	45 (310)	15	55
1015	35 (241)	48 (331)	15	58
1020	38 (262)	52 (359)	12	62
1026	45 (310)	62 (427)	12	68
Normalized Tubing
1008	23 (159)	38 (262)	30		65
1010	25 (172)	40 (276)	30		65
1015	30 (207)	45 (310)	30		70
1020	35 (241)	50 (345)	25		75
1026	40 (276)	60 (414)	25		85
Sink-Drawn Tubing
1008	38 (262)	38 (262)	8	65
1010	40 (276)	40 (276)	8	65
1015	45 (310)	45 (310)	8	67
1020	50 (345)	50 (345)	8	70
1026	55 (379)	55 (379)	7	77
Mandrel-Drawn Tubing
1008	50 (345)	60 (414)	5	73
1010	50 (345)	60 (414)	5	73
1015	55 (379)	65 (448)	5	77
1020	60 (414)	70 (483)	5	80
1026	70 (483)	80 (552)	5	85
Mandrel-Drawn Stress-Relieved Tubing
1008	45 (310)	45 (310)	55 (379)	12	68
1010	45 (310)	45 (310)	55 (379)	12	68
1015	50 (345)	50 (345)	60 (414)	12	72
1020	55 (379)	55 (379)	65 (448)	10	75
1026	65 (448)	65 (448)	75 (517)	10	80

For pipe sizes and grades not found in the section above, please contact HYT at mail: [email protected] with your inquiry.

General Characteristics of A513 Steel Tube

Weldability and Form Availability

A513 mechanical steel tubing is renowned for its excellent weldability through Electric Resistance Welding (ERW) techniques. It is accessible in various forms, including hot or cold-rolled options, catering to different thickness requirements. This versatility is enhanced by a pickling and oiling process that improves its durability and surface quality.

Precision and Tolerance

Unlike A500, A513 steel tubing boasts tighter tolerances, making it ideal for applications where precision is key. This distinction makes A513 preferable for commercial products requiring exact dimensions, such as components of lawnmowers, over A500, which is typically used in structural applications due to its robustness.

Application Suitability

A513's capability to adhere to much tighter tolerances than A500 translates to its suitability for products that demand a precise fit. While A513 shines in crafting items with exact specifications, such as recreational vehicle parts, its relatively low load-bearing capacity suggests it may not be the best choice for heavy-duty structural needs.

Consumer Product Compatibility

The tight tolerance of A513 steel not only makes it a prime candidate for manufacturing most consumer products but also underlines its appeal for items seen and used by consumers daily. This material's blend of durability and affordability positions it as a top choice for a broad range of consumer-facing applications, offering a cost-effective solution without compromising quality.

Durability and Cost-Effectiveness

A513 steel tubing's high durability paired with its affordability makes it a standout choice for numerous applications. As one of the most economical options for mechanical metal tubing, A513 facilitates a balance between quality and budget, ensuring projects can meet precise specifications while remaining financially viable.

A513 Typical Application by Industry

A513 mechanical tubing is renowned for its exceptional surface finish and lightweight attributes, making it an ideal choice for a vast range of applications that demand aesthetic quality without compromising on strength. This includes, but is not limited to, display racks, modern office furniture, innovative greenhouse constructions, and state-of-the-art commercial exercise equipment. Its application spans several critical industries, including automotive, construction, and industrial manufacturing, highlighting its versatile nature.

In the automotive industry, A513 steel plays a crucial role in manufacturing components such as headrests, seat frames, windshield wipers, and drivetrain systems, significantly contributing to the functional and safety aspects of vehicles. The construction sector benefits from A513 steel in the development of robust residential and commercial structures, utilizing it in doors, windows, and essential structural elements to ensure durability and reliability. Furthermore, the production of mechanical tools and hardware illustrates A513 steel's contribution to industrial efficiency and the longevity of products.

Beyond these applications, A513 steel's unique properties make it suitable for projects requiring tight tolerances and minimal load-bearing capacities. It finds its place in the manufacturing of guardrails, bicycles and bicycle racks, kitchen appliances, and greenhouses, showcasing its adaptability and wide-ranging use.

The collective attributes and applications of A513 mechanical tubing highlight its significance to businesses in search of premium, versatile materials for their diverse projects, underlining its value across various sectors for its ability to meet both functional and aesthetic requirements.

For any information related to ASTM A513 Carbon And Alloy Steel Pipe, please contact HYT at mail: [email protected] with your inquiry.

ASTM A513 Steel Materials & Manufacturing

A513 mechanical steel tubes from HYT are manufactured via electric resistance welding, and can made from hot- or cold-rolled steel, as specified.

Machining of ASTM A513

The best machining choice varies across the grades.

Type 1 A513 steel is lower in carbon than other types. It can be hot rolled or hot rolled black. This makes it easy to bend, much like A-500 steel. As a result, type 1 A513 steel frequently shows up in furniture, fences, and storage racks.

Type 5 A513 steel can be machined through a process called Drawn Over Mandrel (DOM). After getting its basic form and shape from electric-resistance welding, DOM steel gets cold drawn through a die and over a mandrel. The die size and angle determines the outside diameter, and the mandrel determines the inside diameter. This process may get repeated several times before the mandrel is removed.

DOM processing creates steel that is uniform in size and thickness and features a denser surface. Sometimes, DOM A-513 steel gets classified as “seamless.” This is not quite accurate, however, as the welding seam is still present although basically unnoticeable.

For any information related to ASTM A513 Carbon And Alloy Steel Pipe, please contact HYT at mail: [email protected] with your inquiry.

ASTM A513 Carbon Steel Permissible Variations in Dimensions (Wall Thickness)

Permissible variations in wall thickness for A513-1 steel tubing are ±10% of the nominal wall. Permissible variations in wall thickness for A513-5 DOM are available by request. Contact HYT for more information or give us a call at +86-18921111366 or [email protected].

Contact Totten Tubes for ASTM A513 Steel Tubing Today

Contact us for more information regarding premium A513 carbon steel mechanical tubing at +86-18921111366 or [email protected] and we will gladly discuss the specific requirements of your next project. HYT is your premium resource for advanced quality A 513 structural carbon steel tubing.

HYT is your trusted source for premium ASTM A513 carbon steel tubing products.

Welcome to HYT, your reliable industry partner. Since its inception, HYT has been a leader in the field of steel pipe manufacturing, dedicated to providing highly customized steel pipe solutions to key industries worldwide including construction, automotive, and petrochemical sectors. Our success is built on a relentless pursuit of innovation and strict quality control.

Customization Guideline

Diverse Material Types
Diverse Pipe Section Shape
Diverse Technique
Diverse Pipe End Type

Available Choice in Steel Pipe Material
HYT offers a diverse range of steel pipe materials to accommodate the practical engineering and product applications across various industries. Our selection includes stainless steel pipes, carbon steel pipes, alloy steel pipes, nickel alloy pipes, copper alloy pipes, and titanium alloy pipes. Read the content below to discover the specific grades of steel pipe materials HYT can provide.

Stainless Steel Pipe Common Standards
ASTM A312, ASTM A213, ASTM A269, ASTM A358, ASME SA312, JIS G3459, JIS G3463, JIS G3448, JIS G3456, JIS G3446, DIN 17456, DIN 17458, EN 10216-5, EN 10217-7, DIN 11850, EN 10296-2, EN 1127, EN 10253-4, EN 10217-7, EN 10216-5, GB/T 14975, GB/T 14976, GB/T 12771, GB 24512.2, GB/T 21832
Stainless Steel Pipe Common Grades
304, 316, 310S, 317L, 321, SUS304, SUS316, SUS310S, SUS317L, SUS321, 1.4301, 1.4401, 1.4845, 1.4438, 1.4541, X5CrNi18-10, X5CrNiMo17-12-2, X8CrNi25-21, X2CrNiMo18-15-4, X6CrNiTi18-10, 06Cr19Ni10, 06Cr17Ni12Mo2, 0Cr25Ni20, 022Cr19Ni13Mo3, 06Cr18Ni11Ti

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Carbon Steel Pipe Common Standards
ASTM A106, ASTM A53, ASTM A179, ASTM A192, ASME SA106, JIS G3454, JIS G3452, JIS G3444, JIS G3461, JIS G3456, DIN 2440, DIN 2448, EN 10255, EN 10217, EN 10216, EN 10216-1, EN 10217-1, EN 10224, EN 10025, EN 10210, GB/T 8163, GB/T 8162, GB/T 3087, GB/T 5310, GB/T 6479
Carbon Steel Pipe Common Grades
A106 Grade B, A53 Grade B, A333 Grade 6, A335 P11, A500 Grade C, STPG 370, STPG 410, STK400, STKM12B, SGP, St37, St52, S235JR, S355J2H, E235, S275JOH, S355JOH, S235JRH, S275J2H, S355K2H, Q235, Q345B, 20#, 45#, 16Mn

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Alloy Steel Pipe Common Standards
ASTM A335, ASTM A213, ASTM A691, ASME SA335, ASME SA213, JIS G3458, JIS G3462, JIS G3467, JIS G3441, JIS G3455, DIN 17175, EN 10216-2, EN 10297-1, EN 10083-3, DIN 17204, EN 10216-2, EN 10297-1, EN 10305-1, EN 10210-1, EN 10253-2, GB/T 3077, GB/T 8162, GB/T 5310, GB/T 9948, GB/T 6479
Alloy Steel Pipe Common Grades
P11, P22, P5, P91, P9, SCM415, SCM435, SCM440, STPA12, STPA22, 13CrMo44, 10CrMo910, X10CrMoVNb9-1, 25CrMo4, 42CrMo4, 16Mo3, 13CrMo4-5, 10CrMo9-10, X11CrMo5, X10CrMoVNb9-1, 12Cr1MoV, 15CrMo, 35CrMo, 42CrMo, 12Cr2Mo

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Nickel Alloy Pipe Common Standards
ASTM B163, ASTM B165, ASTM B167, ASTM B444, ASME SB622, JIS H4551, JIS H4552, JIS H4553, JIS H4600, JIS G4902, DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754, EN 10216-5, EN 10217-7, EN 10250-4, EN 10272, EN 10095, GB/T 15007, GB/T 2882, GB/T 3625, GB/T 3624, GB/T 2054
Nickel Alloy Pipe Common Grades
Alloy 200 (UNS N02200), Alloy 400 (Monel 400, UNS N04400), Alloy 600 (Inconel 600, UNS N06600), Alloy 625 (Inconel 625, UNS N06625), Alloy 825 (Incoloy 825, UNS N08825), NW2200 (Ni 99.2), NW4400 (Monel 400), NW6600 (Inconel 600), NW6625 (Inconel 625), NW8825 (Incoloy 825), NiMo16Cr15W (Hastelloy C-276, 2.4819), NiCr15Fe (Inconel 600, 2.4816), NiCr22Mo9Nb (Inconel 625, 2.4856), NiCu30Fe (Monel 400, 2.4360), NiCr21Mo (Alloy 825, 2.4858), NS111 (Alloy 200), NS334 (Hastelloy C-276), NS312 (Alloy 600), NS336 (Inconel 625), NS321 (Incoloy 825).

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Copper Alloy Pipe Common Standards
ASTM B111, ASTM B280, ASTM B75, ASTM B88, ASTM B251, JIS H3300, JIS H3250, JIS H3320, JIS H3560, DIN 17664, DIN 17671, DIN 17660, DIN EN 12449, DIN EN 12451, EN 12449, EN 12451, EN 1057, EN 13600, EN 13348, GB/T 4423, GB/T 5231, GB/T 18033, GB/T 8890, GB/T 1527
Copper Alloy Pipe Common Grades
C12200, C11000, C70600, C71500, C23000, C1220, C1100, C7060, C7150, C6870, Cu-DHP, Cu-ETP, CuNi10Fe1Mn, CuNi30Mn1Fe, CuZn37, Cu-DHP (CW024A), Cu-ETP (CW004A), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H), CuZn30 (CW505L), H59, H62, T2, QSn4-3, QAl9-4

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Titanium Alloy Pipe Common Standards
ASTM B861, ASTM B862, ASTM B337, ASTM B338, ASME SB338, JIS H4600, JIS H4631, JIS H4632, JIS H4635, JIS H4670, DIN 17861, DIN 17869, DIN 17850, DIN 17851, DIN 17864, EN 10216-5, EN 17851, EN 17860, EN 17861, EN 17862, GB/T 3625, GB/T 3624, GB/T 13810, GB/T 2965, GB/T 9
Titanium Alloy Pipe Common Grades
Grade 2, Grade 5 (Ti-6Al-4V), Grade 9 (Ti-3Al-2.5V), Grade 7, Grade 12, Class 1 (Pure Titanium), Class 60 (Ti-6Al-4V), Class 12 (Ti-0.3Mo-0.8Ni), Class 2 (Pure Titanium), Class 61 (Ti-6Al-4V ELI), 3.7035 (Grade 2), 3.7165 (Ti-6Al-4V), 3.7195 (Ti-3Al-2.5V), 3.7235 (Grade 7), 3.7105 (Grade 12), Grade 2, Ti6Al4V (Grade 5), Ti3Al2.5V (Grade 9), Ti0.2Pd (Grade 7), Ti0.3Mo0.8Ni (Grade 12), TA1 (Pure Titanium), TC4 (Ti-6Al-4V), TA10 (Ti-0.3Mo-0.8Ni), TA2 (Pure Titanium), TC4ELI (Ti-6Al-4V ELI)

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Available Shape Choice of Carbon Steel Pipe

HYT offers an unmatched range of custom carbon steel tubing options to meet the diverse needs of your projects. Our product lineup includes tubing in various shapes such as round, square, rectangular, triangular, hexagonal, octagonal, and oval, catering to a wide array of applications across different industries.

Product Display of Diverse Section Shape

Round Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Square and Rectangular Tube

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Oval Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Hexagonal Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Octagonal Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Available Technique of Steel Pipe

HYT specializes in two primary steel pipe manufacturing techniques: seamless and welded. Each method offers unique manufacturing processes and applications, ensuring we can meet the diverse needs of various industries.

Seamless Steel Pipes

Seamless steel pipes are manufactured through processes such as hot rolling, cold rolling, or cold drawing. These methods start with a solid steel billet, heated and formed under high temperature and pressure to create a tube without any welded seams. The main advantages of seamless pipes lie in their uniformity and strength, making them ideal for high-pressure, high-temperature environments, or other demanding conditions. Due to their seamless nature, these pipes exhibit higher integrity and resistance to cracking under internal and external pressures.

Welded Steel Pipes

In contrast to seamless pipes, welded steel pipes are produced through methods like Electric Resistance Welding (ERW), Submerged Arc Welding (SSAW), or Longitudinal Submerged Arc Welding (LSAW). These processes involve curling steel sheets or coils into a tubular shape and welding them at the seam. The advantages of welded pipes include cost-effectiveness and the ability to manufacture large diameters and thick-walled pipes, crucial for many structural and transportation applications.

Electric Resistance Welding (ERW) Manufacturing Process

Submerged Arc Welding (SSAW) Manufacturing Process

Longitudinal Submerged Arc Welding (LSAW) Manufacturing Process

Whether opting for the robustness and tightness of seamless steel pipes or the economical and adaptable features of welded steel pipes, HYT provides high-quality solutions tailored to your specific requirements. Our expertise in technology and manufacturing ensures you receive the best product performance and enduring reliability.

Pipe End Processing
At HYT, we offer comprehensive end processing services for steel pipes to cater to diverse industrial applications. Our customized processing options include:
Plain End: This finish provides a clean and smooth end cut, ideal for applications requiring welding or other types of connections. Plain end pipes are suitable for various fluid transmission systems, ensuring seamless integration into pipelines.
Bevelled End: Bevelled ends are prepared to facilitate easier welding, especially in extensive pipeline setups. The angle of the bevel can be customized according to specific client requirements to optimize welding strength and quality.
Threaded End: Threaded end processing allows for steel pipes to be connected via threads, eliminating the need for welding. This connection method is easy to install and maintain. We offer a variety of thread specifications to match different interfaces and pressure requirements, making it a quick and reliable choice during installation.

HYT – YOUR TRUSTED METAL PRODUCT SOURCE

HYT Metal is a professional manufacturer and source factory engaged in the research, development, production, and service of various metal products such as sheet, pipe, bar ,coil, strip, fitting made of stainless steel, carbon steel, alloy steel ,nickel alloy, copper alloy ,titanium alloy, etc. Our factory is equipped with multiple advanced cold drawing and cold rolling production lines, reflecting over 15 years of rich experience in both the domestic and international markets. Whether you require any metal products, HYT is committed to delivering products that excel in strength, durability, and performance, ensuring satisfaction in every aspect of our service.

HYT CERTIFICATIONS

At HYT, every product we offer is a pledge to excellence. Our manufacturing processes are governed by a stringent quality management system, certified under ISO 9001:2015, ensuring consistent and superior product quality.
Moreover, our products are CE certified, compliant with European safety standards, and UL certified to meet the rigorous requirements of both the United States and Canada.

HYT - Your Trusted Metal Product Source

HYT Metal stands as a fully-owned subsidiary of Wuxi Lusheng Special Steel Co., Ltd. Our foundation is built on a strong commitment to extending our reach beyond domestic borders, focusing on international sales and market exploration for a vast array of steel product. We are metal experts and have been providing quality customer service and products since 2015.

At HYT, we supply a wide range of metals for a variety of applications. Our stock includes: carbon steel, stainless steel, aluminum, tool steel, alloy steel, nickel alloy, brass, bronze, copper and titanium alloy.

We stock a wide range of shapes including: bars, tubes, sheets, plates and more. And we can cut metal to your exact specifications.

Contact us for more information regarding premium metal product at +86-18921111366 or [email protected] and we will gladly discuss the specific requirements of your next project.

HYT is your premium resource for various metal product.